Garmin G1000 Cockpit Reference Manual page 72

Hazard Avoidance
Displaying Traffic on the Navigation Map
1) Ensure TAS is operating. With the Navigation Map displayed, press the
MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
GTS 800 Traffic Advisory System (TAS) (Optional)
System Self Test
1) Set the range to 2/6 nm.
2) Press the STANDBY Softkey.
3) Press the TEST Softkey.
4) Self test takes approximately eight seconds to complete. When completed
successfully, traffic symbols display and a voice alert "Traffic Advisory
System Test Passed" is heard. If the self test fails, the system reverts to
Standby Mode and a voice alert "Traffic Advisory System Test Failed" is
heard.
Enabling/Disabling Flight ID Display
On the Traffic Map Page, press the FLT ID Softkey.
Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Press the OPERATE Softkey to begin displaying traffic. OPERATING is
displayed in the Traffic mode field.
4) Press the ALT MODE Softkey to change the altitude volume.
5) Press the STANDBY Softkey to place the system in the Standby mode.
STANDBY is displayed in the Traffic mode field.
6) Turn the Joystick clockwise to display a larger area or counter-clockwise to
display a smaller area.
Displaying Traffic on the Navigation Map
1) Ensure TAS is operating.
2) With the Navigation Map displayed, press the MAP Softkey.
3) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
56
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK 100
190-00645-07 Rev. A
™