Electronic Checklists - Garmin G1000 Cockpit Reference Manual

Additional Features
4) Press the CLR Key to clear the message text. If the CLR Key is pressed
again, the message is restored.
5) Press the ENT Key while the message line is cleared to clear the message
text.

ELECTRONIC CHECKLISTS

The system accesses the checklists from an SD card inserted into the card slot.
If the SD card contains an invalid checklist file or no checklist, the Power-up Page
messages display 'Checklist File: Invalid' or 'Checklist File: N/A' (not available) and the
CHKLIST Softkey is not available.
Accessing and Navigating Checklists
1) From any page on the MFD, press the CHKLIST Softkey.
2) Turn the large FMS Knob to select the 'GROUP' field.
3) Turn the small FMS Knob to select the desired procedure and press the
ENT Key.
4) Turn the large FMS Knob to select the 'CHECKLIST' field.
5) Turn the FMS Knob to select the desired checklist and press the ENT Key.
The selected checklist item is indicated with white text surrounded by a
white box.
6) Press the ENT Key or press the CHECK Softkey to check the selected
checklist item. The line item turns green and a checkmark is placed in the
associated box. The next line item is automatically selected for checking.
Either FMS Knob can be used to scroll through the checklist and select the
desired checklist item.
Press the CLR Key or press the UNCHECK Softkey to remove a check mark
from an item.
7) When all checklist items have been checked, '*Checklist Finished*' is
displayed in green text at the bottom left of the checklist window. If all
items in the checklist have not be checked, '*CHECKLIST NOT FINISHED*'
will be displayed in yellow text.\
8) Press the ENT Key. 'GO TO NEXT CHECKLIST?' will be highlighted by the
cursor.
9) Press the ENT Key to advance to the next checklist.
74
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK 100
190-00645-07 Rev. A
™