Gdc 74A Message Advisories; Gmc 710 Message Advisories - Garmin G1000 Cockpit Reference Manual

GDC 74A MESSAGE ADVISORIES

Message
ADC1 ALT EC – ADC1 altitude error
correction is unavailable.
ADC2 ALT EC – ADC2 altitude error
correction is unavailable.
ADC1 AS EC – ADC1 airspeed error
correction is unavailable.
ADC2 AS EC – ADC2 airspeed error
correction is unavailable.
ADC1 SERVICE – ADC1 needs
service. Return unit for repair.
ADC2 SERVICE – ADC2 needs
service. Return unit for repair.
GDC1 MANIFEST – GDC1 software
mismatch, communication halted.
GDC2 MANIFEST – GDC2 software
mismatch, communication halted.

GMC 710 MESSAGE ADVISORIES

Message
GMC CNFG – GMC Config error.
Config service req'd.
GMC FAIL – GMC is inoperative.
GMC MANIFEST – GMC software
mismatch, communication halted.
GMC KEYSTK – GMC [keyname]
Key is stuck
SPD KEY DISABLED - The SPD key
is disabled for this model aircraft.
190-00645-07 Rev. A
GDC1 or GDC2 is reporting that the altitude
error correction is unavailable. The G1000
system should be serviced.
GDC1 or GDC2 is reporting that the airspeed
error correction is unavailable. The G1000
system should be serviced.
The GDC1 should be serviced.
The GDC2 should be serviced.
The GDC1 or GDC2 has incorrect software
installed. The system should be serviced.
Error in the configuration of the GMC 710.
A failure has been detected in the GMC 710.
The GMC 710 is unavailable.
The GMC 710 has incorrect software installed.
The G1000 system should be serviced.
A key is stuck on the GMC 710 bezel. Attempt
to free the stuck key by pressing it several times.
The G1000 system should be serviced if the
problem persists.
The SPD Key on GMC 710 has no function in
this aircraft model.
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
Annunciations & Alerts
Comments
Comments
100
™
105