Siriusxm Weather (Optional) - Garmin G1000 Cockpit Reference Manual

3) Press the CELL Softkey to display 'CELL' data or press the STRIKE Softkey to
display 'STRIKE' data. 'CELL' or 'STRIKE' is displayed in the mode box in the
upper left corner of the Stormscope Page.
4) Press the BACK Softkey to return to the main Stormscope page.
Change the Viewing Mode Between 360˚ and 120˚
1) Select the Stormscope Page.
2) Press the VIEW Softkey. The 360 and ARC softkeys are displayed. Press the
360 Softkey to display a 360˚ viewing area or press the ARC Softkey to
display a 120˚ viewing area.
3) Press the BACK Softkey to return to the main Stormscope page.

SIRIUSXM WEATHER (OPTIONAL)

WARNING: Do not use data link weather information for maneuvering in, near,
or around areas of hazardous weather. Information contained within data link
weather products may not accurately depict current weather conditions.
WARNING: Do not use the indicated data link weather product age to deter-
mine the age of the weather information shown by the data link weather
product. Due to time delays inherent in gathering and processing weather
data for data link transmission, the weather information shown by the data
link weather product may be significantly older than the indicated weather
product age.
Displaying SiriusXM Weather on the Navigation Map Page
1) Press the MAP Softkey.
2) Press the NEXRAD or XM LTNG Softkey to display the desired weather.
Press the applicable softkey again to remove weather data from the
Navigation Map Page.
Display METAR and TAF information on the Airport Information Page
1) Turn the large FMS Knob to select the WPT Page Group.
2) Turn the small FMS Knob to select the Airport Information Page.
3) Press the WX Softkey to display METAR and TAF text (METAR and TAF
information is updated every 12 minutes).
190-00645-07 Rev. A Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
Hazard Avoidance
100
™
51