Garmin G1000 Cockpit Reference Manual page 123

Message
DB CHANGE – Database changed.
Verify stored airways.
FPL TRUNC – Flight plan has been
truncated.
LOCKED FPL – Cannot navigate
locked flight plan.
WPT ARRIVAL – Arriving at
waypoint -[xxxx]
STEEP TURN – Steep turn ahead.
INSIDE ARSPC – Inside airspace.
ARSPC AHEAD – Airspace ahead
less than 10 minutes.
ARSPC NEAR – Airspace near and
ahead.
ARSPC NEAR – Airspace near – less
than 2 nm.
APPR INACTV – Approach is not
active.
190-00645-07 Rev. A
This occurs when a stored flight plan contains
an airway that is no longer consistent with the
navigation database. This alert is issued only
after a navigation database update. Verify use
of airways in stored flight plans and reload
airways as needed.
This occurs when a newly installed navigation
database eliminates an obsolete approach
or arrival used by a stored flight plan. The
obsolete procedure is removed from the flight
plan. Update flight plan with current arrival or
approach.
This occurs when the pilot attempts to activate
a stored flight plan that contains locked
waypoint. Remove locked waypoint from flight
plan. Update flight plan with current waypoint.
Arriving at waypoint [xxxx], where [xxxx] is the
waypoint name.
A steep turn is 15 seconds ahead. Prepare to
turn.
The aircraft is inside the special use airspace.
Special use airspace is ahead of aircraft. The
aircraft will penetrate the special use airspace
within 10 minutes.
Special use airspace is near and ahead of the
aircraft position.
Special use airspace is within 2 nm of the
aircraft position.
The system notifies the pilot that the loaded
approach is not active. Activate approach when
required.
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
Annunciations & Alerts
Comments
100
™
107