Hazard Avoidance; Customizing The Hazard Displays On The Navigation Map; Stormscope ® (Optional) - Garmin G1000 Cockpit Reference Manual

CUSTOMIZING THE HAZARD DISPLAYS ON THE NAVIGATION MAP

1) With the Navigation Map Page displayed, press the MENU Key to display
the Navigation Map Page Menu . The cursor flashes on the 'Map Setup'
option.
2) Press the ENT Key. The Map Setup Menu is displayed. Turn the small FMS
Knob to select 'Weather' to customize the display of weather features.
Select 'Traffic' to customize the display of traffic.
3) Press the small FMS Knob to return to the Navigation Map Page.
STORMSCOPE (OPTIONAL)
®
WARNING: Do not rely on information from a lightning detection system display
as the sole basis for hazardous weather avoidance. Range limitations and
interference may cause the system to display inaccurate or incomplete information.
Refer to documentation from the lightning detection system manufacturer for
detailed information about the system.
Displaying Stormscope Lightning Data on the Navigation Map Page
1) Press the MAP Softkey.
2) Press the STRMSCP Softkey. Press the STRMSCP Softkey again to remove
Stormscope Lightning Data from the Navigation Map Page.
Strike is less than 6 seconds old
Strike is between 6 and 60 seconds old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old
Selecting the 'cell' or 'strike' mode on the Navigation Map
1) Press the MENU Key.
2) With 'Map Setup' selected, press the ENT Key.
3) Select the 'Weather' group.
190-00645-07 Rev. A

HAZARD AVOIDANCE

Lightning Age
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
Hazard Avoidance
Symbol
100
™
49