Garmin G1000 Cockpit Reference Manual page 86

Additional Features
Or:
Press the FMS Knob to highlight the channel list and turn the large FMS
Knob to scroll through the channels.
3) With the desired channel highlighted, press the ENT Key.
Entering a Channel Directly
1) While on the XM Radio Page, press the CHNL Softkey.
2) Press the DIR CH Softkey. The channel number in the Active Channel Box
is highlighted.
3) Press the numbered softkeys located on the bottom of the display to
directly select the desired channel number.
4) Press the ENT Key to activate the selected channel.
Assigning Channel Presets
Up to 15 channels from any category can be assigned a preset number.
1) On the XM Radio Page, with the desired channel active, press the PRESETS
Softkey to access the first five preset channels (PS1 - PS5).
2) Press the MORE Softkey to access the next five channels (PS6 – PS10),
and again to access the last five channels (PS11 – PS15). Pressing the
MORE Softkey repeatedly cycles through the preset channels.
3) Press any one of the (PS1 - PS15) softkeys to assign a number to the
active channel.
4) Press the SET Softkey on the desired channel number to save the channel
as a preset.
Adjusting Volume
1) With the XM Radio Page displayed, select the VOL Softkey.
2) Press the VOL Softkey to access the volume control softkeys.
3) Press VOL + or VOL - softkeys to adjust the volume level.
Mute SiriusXM Audio
1) Select the XM Radio Page or XM Information Page
2) Select the MUTE Softkey to mute the audio. Select the MUTE Softkey
again to unmute the audio.
70
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK 100
190-00645-07 Rev. A
™