Specifications And Agency Compliance; Controller And Service Tool Requirements; Tracer Tu; Web Ui - Trane IntelliPak Programming Manual

Introduction

Specifications and Agency Compliance

Specification
Input power:
Storage temperature:
Operating temperature:
Mounting weight:
Environmental rating (enclosure):
Agency Compliance
• UL916 PAZX, Open Energy Management Equipment
• UL94-5V, Flammability
• FCC CFR Title 47, Part 15.109: Class A Limit, (30 MHz—4 GHz)
• CE EMC Directive 2004/108/EC
• CE EMC Directive 2004/108/EC

Controller and Service Tool Requirements

Tracer TU

Tracer TU Service Tool Version 10.2 or higher is only required for TGP2 and modifications done in
the field.
Note: Tracer TU is not needed for normal operation. If you need to perform configuration changes,

Web UI

To perform firmware updates, setup communication protocols, backup and restore, scheduling,
and create users or custom trend views connect using Web UI:
1. Connect a laptop to the USB service tool port using a USB 2.0 A to Be cable.
2. Open a web browser and connect to http://198.80.81.1 to access Web UI.
Figure 1. Web UI connection
8
24 Vac +/- 15%, 21 VA, 50 or 60 Hz
-67°F to 203°F (-55°C to 95°C)
Humidity: Between 5% and 100% (non-condensing)
Temperature: -40°F to 158°F (-40°C to 70°C)
Humidity: Between 5% and 100% (non-condensing)
Mounting surface must support 1.625 lb (0.737 kg)
Mounting Type: VESA (75 mm x 75 mm)
IP56 (dust and strong water protected) with use of an optional Sealed Ethernet Cable
add new features, or customize the operation of the equipment, contact your local Trane
office.
RT-SVP011A-EN