Trane IntelliPak Programming Manual page 66

Troubleshooting
Diagnostic Name Affects
and Source Target
Suction Circuit
Temperature 2
Cktx
Suction
Temperature 2
Cktx
Suction Temp
Sensor
Suction Pressure Circuit
Sensor Cktx
Suction Pressure
Sensor Cktx
Suction Press
Sensor
Discharge Circuit
Pressure Sensor
Cktx
Discharge
Pressure Sensor
Cktx
Discharge Press
Sensor
Mixed Air DX
Temperature Cooling
Sensor Evapy
Mixed Air
Temperature
Sensor Evapy
Mixed Air Temp
Sensor
Evap Leaving Air Unit
Coil Temp X
Sensor
Evap Leaving Air
Coil Temp X
Sensor
Evap Lvg Air
Temp Sensor
Outdoor Air DX
Temperature Cooling
Sensor
Outdoor Air
Temperature
Sensor
Outdoor Air
Temp Sensor
MP: Invalid N/A
Configuration
MP: Invalid
Configuration
MP: Invalid
Configuration
66
Severity Persistence
Immediate Latching
Shutdown
Immediate Latching
Shutdown
Immediate Latching
Shutdown
Normal Latching
Shutdown
Warning with Latching
Special Action
Warning Non-Latching All
N/A Latching
Active
Modes
Criteria
[Inactive
Modes]
All The suction temperature sensor has failed out of range. Remote
All The suction pressure sensor has failed out of range.
All The discharge pressure sensor has failed out of range.
All Temperature sensor has failed out of range.
All Temperature sensor has failed out of range.
The DX cooling continues to run but reheat for
dehumidification is stopped.
Temperature sensor has failed out of range.
All MP has an invalid configuration based on the current
software installed.
Reset
Level
Remote
Remote
Remote
Remote
Remote
Remote
RT-SVP011A-EN