The Default Setting Is 1Min; Density Level - Oki MC160MFP Maintenance Manual

Oki Data CONFIDENTIAL
12.10.6

DENSITY LEVEL

11.10.6 DENSITY LEVEL
Function
• Select the scan data density that is used as a default.
Use
• The default setting is
Setting/
procedure
(LIGHT) -2 / -1 / "0" / +1 / +2 (DARK)
44292401TH Rev.1
.
13. User service mode
12. User service mode
13. User service mode
13.1 User service mode function tree
12.1 User service mode function tree 13.1 User service mode function tree
A. Procedure
1. Select [UTILITY] with the
A. Procedure
/ key and press the Select key.
1. Select [UTILITY] with the
2. Keep on pressing / key and press the Select key.
key over two seconds.
2. Keep on pressing
key over two seconds.
B. Exiting
• Press the Stop/Reset key. B. Exiting
• Press the Stop/Reset key.
NOTE
• <*1>: If engine is EU type, this item doesn't display.
NOTE
• <*1>: If engine is EU type, this item doesn't display.
MAINTENANCE
MAINTENANCE
FAX MAINTENANCE TX SPEED
FAX MAINTENANCE TX SPEED
RX SPEED
RX SPEED
TX LEVEL
TX LEVEL
RX LEVEL
RX LEVEL
DTMF LEVEL
DTMF LEVEL
CNG LEVEL
CNG LEVEL
CED LEVEL
CED LEVEL
ECM MODE
ECM MODE
CODING SCHEME
CODING SCHEME
TONER EMPTY REPORT
TONER EMPTY REPORT
PROTOCOL REPORT
PROTOCOL REPORT
GDI TIMEOUT
GDI TIMEOUT
TWAIN TIMEOUT
TWAIN TIMEOUT
ENERGY SAVE MODE <*1>
ENERGY SAVE MODE <*1>
ADJUST
CIS MAIN ZOOM
ADJUST
CIS MAIN ZOOM
CIS SUB ZOOM
CIS SUB ZOOM
CIS MAIN REGIST
CIS MAIN REGIST
CIS SUB REGIST
CIS SUB REGIST
ADF SUB ZOOM
ADF SUB ZOOM
ADF MAIN REG
ADF MAIN REG
ADF SUB REG
ADF SUB REG
FLICKER
FLICKER
TOP ADJUSTMENT
TOP ADJUSTMENT
LEFT ADJ. (FRONT)
LEFT ADJ. (FRONT)
LEFT ADJ. (BACK)
LEFT ADJ. (BACK)
ADJUSTMENT/SETTING
Ref.
Ref.
page
page
P.120
P.120
P.120
P.120
PLAIN PAPER
PLAIN PAPER
THICK
THICK
ENVELOPE
ENVELOPE
LEFT ADJ TRAY1
LEFT ADJ TRAY1
LEFT ADJ TRAY2
LEFT ADJ TRAY2
LEFT ADJ TRAY1
LEFT ADJ TRAY1
LEFT ADJ TRAY2
LEFT ADJ TRAY2
119 /