Oki MC160MFP Maintenance Manual page 132

Oki Data CONFIDENTIAL
13.6 DISPLAY 14.6 DISPLAY
13.6.1 MAIN F/W VER.
14.6.1 MAIN F/W VER.
Function • Displays the version of the controller firmware.
• When upgrading the firmware
Use
• When the image processing board has been replaced with a new one
14.6.2 ENGINE F/W VER.
13.6.2 ENGINE F/W VER.
Function • Displays the version of the engine firmware.
Use • When the printer control board has been replaced with a new one
14.6.3 MAIN RAM SIZE
13.6.3 MAIN RAM SIZE
Function • Displays the size of the main memory.
Use • When checking for the memory size
13.6.4 14.6.4 SERIAL NO. SERIAL NO.
Function • Displays the serial number of the printer engine.
Use • When checking for the printer serial number
14.6.5 BB CPLD VERSION
13.6.5 BB CPLD VERSION
Function
• Displays the version of the BB CPLD firmware.
Use
44292401TH Rev.1
14.7 FUNCTION
13.7 FUNCTION
14.7.1 PAPER FEED TEST
13.7.1 PAPER FEED TEST
• To check the paper feeding in the paper take-up/transport sections without printing on
Function
the paper.
Use • When a paper misfeed occurs
1. Select the [TRA Y1] or [TRA Y2].
2. Press the Select key to begin testing paper feeding.
3. Press the Stop/Reset key to stop testing paper feeding.
Setting/
procedure
NOTE
• It cannot be operated at the time of warming up.
• Don't count.
14.7.2 PRN TEST PATTERN
13.7.2 PRN TEST PATTERN
A. PATTERN1
Function • To print the test pattern for adjusting the image.
Use • If there is tilt or when registration or zoom ratio adjustments are performed
1. Select the [TRA Y1] or [TRA Y2].
2. Select the [PA TTERN1].
3. Press the Select key to print the test pattern.
Setting/
procedure
B. PATTERN2
Function • To print the test pattern for halftones and gradations.
• When checking density and pitch irregularities
Use
• When checking reproducibility of gradations
1. Select the [TRA Y1] or [TRA Y2].
2. Select the [PA TTERN2].
3. Press the Select key to print the test pattern.
Setting/
procedure
ADJUSTMENT/SETTING
4139F3C550DA
4139F3C551DA
131 /