Oki MC160MFP Maintenance Manual page 137

Oki Data CONFIDENTIAL
14.13 CLEAR DATA
13.13 CLEAR DATA
14.13.1 SRAM CLEAR
13.13.1 SRAM CLEAR
To clear the settings for the functions listed at the right and return the functions to their
Function
default settings.
The following items are cleared (initialization).
• Menu mode (Except for [ADMIN. MANAGEMENT] - [USER SETTING] - [DATE&TIME]
that keeps its setting value):
Use
• Only [USER SERVICE MODE] of the user service mode: Set to default
• Only [TX/RX Result] of the Display mode: Clear
• Only [SERVICE'S CHOICE] and [SOFT SWITCH] of the Service mode: Set to default
NOTE
• Before executing [SRAM CLEAR], be sure to record the setting values that are to
be initialized through [SRAM CLEAR].
• For the record of the setting values, it is a good idea to have reports and lists
Setting/
printed.
procedure
• Some setting values are not included any of these reports or lists. Be sure to
make a note of them separately.
• After [SRAM CLEAR] has been executed, make necessary entries of data again
based on the setting values recorded.
14.13.2 MEMORY CLEAR
13.13.2 MEMORY CLEAR
To clear the settings for the functions listed at the right and return the functions to their
Function
default settings.
The following items are cleared (initialization).
• Only [SERVICE'S CHOICE] and [FIXED ZOOM CHANGE] of the Service mode: Set to
Use
default
NOTE
• Before executing [MEMORY CLEAR], be sure to record the setting values that are
to be initialized through [MEMORY CLEAR].
• For the record of the setting values, it is a good idea to have reports and lists
Setting/
printed.
procedure
• Some setting values are not included any of these reports or lists. Be sure to
make a note of them separately.
• After [MEMORY CLEAR] has been executed, make necessary entries of data again
based on the setting values recorded.
44292401TH Rev.1
14. SOFT SWITCH set
15. SOFT SWITCH set
14.1 Description
15.1 Description
This machine is equipped with totally 64 soft switches that are used for fax adjustment in
order to conform to the standard of each country.
The default setting is changeable.
The default setting of soft switch is automatically changed according to the following set-
tings.
• The marketing area is set in procedures of [UTILITY]
[USER SETTING] [PTT SETTING].
• The marketing area is set at [PTT Setting] by using LSU utility software.
• When the setting is made in the procedures of [SERVICE MODE]
[SRAM CLEAR], the default setting is defined according to the current setting of market-
ing area.
Bit No. can be changed with the following way.
• [SOFT SWITCH] of [SERVICE MODE].
See P.132
SERVICE MODE
DISPLAY
FUNCTION
SOFT SWITCH
Hex-binary
conversion list
0 1 2 3 4 5
4 (8) 0 0 0 0 0 0
3 (7) 0 0 0 0 1 1
Bit No.
2 (6) 0 0 1 1 0 0
1 (5) 0 1 0 1 0 1
14.2 Default setting
15.2 Default setting
14.2.1 Country for each marketing area
15.2.1 Country for each marketing area
NOTE
• A different country may be applicable depending on the communications stan-
dard.
• The marketing area settings is set in the procedure of [UTILITY]
AGEMENT] [USER SETTING] [PTT SETTING].
See P.111
ADJUSTMENT/SETTING
[ADMIN. MANAGEMENT]
[CLEAR DA TA]
SOFT SWITCH
#01:10 00 00 00
#02:00 00 01 00
#03:01 10 00 01
Bit No. 1 2 3 4 5 6 7 8
A0FDF3E504DA
HEX
9 A B C D E F
6 7 8
0 0 1 1 1 1 1 1 1 1
1 1 0 0 0 0 1 1 1 1
1 1 0 0 1 1 0 0 1 1
0 1 0 1 0 1 0 1 0 1
[ADMIN. MAN-
136 /