Oki MC160MFP Maintenance Manual page 90

Oki Data CONFIDENTIAL
[1]
[1]
[1] A034F2C047DA
[1]
A034F2C047DA
A034F2C047DA
A034F2C047DA
[1] [3] [4] [2]
[1] [3] [4] [2]
[1] [3] [4] [2]
[1] [3] [4] [2]
[3]
A034F2C048DA
[3]
[3]
[3]
A034F2C048DA
A034F2C048DA
A034F2C048DA
[1]
[1]
[1] A034F2C049DA
[1]
A034F2C049DA
A034F2C049DA
A034F2C049DA
[1]
[1]
[1] A034F2C050DA
[1]
A034F2C050DA
A034F2C050DA
A034F2C050DA
44292401TH Rev.1
3. Remove the spring [1].
3. Remove the spring [1].
3. Remove the spring [1].
3. Remove the spring [1].
4. Remove two E-rings [1], belt [2], two
4. Remove two E-rings [1], belt [2], two
4. Remove two E-rings [1], belt [2], two
gears [3] and bearing [4].
4. Remove two E-rings [1], belt [2], two
NOTE gears [3] and bearing [4].
gears [3] and bearing [4].
gears [3] and bearing [4].
NOTE
NOTE • Make sure to pull out the belt [2]
NOTE
• Make sure to pull out the belt [2]
• Make sure to pull out the belt [2] and gears [3] forward parallel
• Make sure to pull out the belt [2]
and gears [3] forward parallel
and gears [3] forward parallel together.
and gears [3] forward parallel
together.
• Use care not to lose the shaft. together.
together.
• Use care not to lose the shaft.
• Use care not to lose the shaft.
• Use care not to lose the shaft.
5. Remove two covers [1] by taking out
5. Remove two covers [1] by taking out
5. Remove two covers [1] by taking out
the hooks at both sides.
5. Remove two covers [1] by taking out
the hooks at both sides.
the hooks at both sides.
the hooks at both sides.
6. Remove two levers [1].
6. Remove two levers [1].
6. Remove two levers [1].
6. Remove two levers [1].
[1]
A034F2C523DA
[1]
[2] [3]
A034F2C053DA
7.3.22 Scanner motor assy
6.3.22 Scanner motor assy
1. Remove the original glass assy.
See P.77
[2] [3]
[1]
A034F2C103DA
MAINTENANCE
7. Slide out the motor assy [1].
8. Remove two screws [1] and discon-
nect the connector [2], and remove
the developing motor [3].
2. Remove three screws [1] and dis-
connect the connector [2], and
remove the scanner motor assy [3].
89 /