Oki MC160MFP Maintenance Manual page 130

Oki Data CONFIDENTIAL
14.4.14 TEMPERATURE
13.4.14 TEMPERATURE
• To adjust the fusing heating temperature individually for each paper type so as to
Function
ensure good fusing performance that varies with varying environmental conditions.
Use • When fusing performance is poor, or wax streak or offset occurs when the type of
paper is changed or environmental conditions change.
• Use this function when curled paper, or paper misfeed as a result of the curled paper,
occurs under varying environmental conditions or depending on the type of paper
used.
PLAIN PAPER: -10 C / -5 C / 0 C
Adjustment
THICK: -10 C / -5 C / 0 C
Range
ENVELOPE: -10 C / -5 C / 0 C
Adjustment If fusing performance is poor, increase the setting.
Instructions If wax streaks occur, decrease the setting.
If offset is poor, decrease the setting.
If curling of the paper occurs, decrease the setting.
Setting 1. Select [TEMPERA TURE] and press the Select key.
/procedure 2. Select the type of paper and press the Select key.
3. Select desired setting value with the up key /down key
14.4.15 SUPPLIES REPLACE
13.4.15 SUPPLIES REPLACE
A. FUSER UNIT
Function • Resets the fuser unit counter.
Use • To use when the fuser unit has been replaced.
Setting 1. Select [SUPPLIES REPLACE]
/procedure 2. Press the Select key.
3. Press the Select key and reset the counter.
B. TRANSFER ROLLER
Function • Resets the transfer roller counter.
Use • To use when the transfer roller has been replaced.
Setting 1. Select [SUPPLIES REPLACE]
/procedure 2. Press the Select key.
3. Press the Select key and reset the counter.
14.4.16 BK CLEAR
13.4.16 BK CLEAR
Function • To clear engine information backup data
• Use when the engine information backup data is cleared.
NOTE
Use
• Execute this function to synchronize data when the MFP board or the printer
control board is replaced with a new one.
Setting 1. Select [BK CLEAR] and press the Select key.
/procedure 2. Press the Select key and clear the backup data.
44292401TH Rev.1
and press the Select key.
[FUSER UNIT].
[TRANSFER ROLLER].
13.5 COUNTER 14.5 COUNTER
13.5.1 TOTAL PRINT
14.5.1 TOTAL PRINT
A. TOTAL FACE
Function • Displays the total number of face.
Use • When checking the total number of face.
B. COLOR COPY
Function • Displays the number of color copies made.
Use • When checking the number of color copies made.
C. COLOR PRINT
Function • Displays the number of color printed pages produced.
Use • When checking the number of color printed pages produced.
D. MONO COPY
Function • Displays the number of monochrome copies made.
Use • When checking the number of monochrome copies made.
E. MONO PRINT
Function • Displays the number of monochrome printed pages produced.
Use • When checking the number of monochrome printed pages produced.
F. FAX PRINT
Function • Displays the number of FAX printed pages produced.
Use • When checking the number of FAX printed pages produced.
G. TOTAL DUP.
Function • Displays the total number of sheets of duplex copy or duplex print.
Use • When checking the total number of sheets of duplex copy or duplex print.
H. D COLOR COPY
Function • Displays the number of duplex color printed pages produced.
Use • When checking the number of duplex color printed pages produced.
I. D COLOR PRN
Function • Displays the number of duplex monochrome copies made.
Use • When checking the number of duplex monochrome copies made.
J. D MONO COPY
Function • Displays the number of duplex monochrome copies made.
Use • When checking the number of duplex monochrome copies made.
ADJUSTMENT/SETTING
129 /