Oki MC160MFP Maintenance Manual page 93

Oki Data CONFIDENTIAL
7.3.27 Registration roller solenoid (SD2)
6.3.27 Registration roller solenoid (SD2)
1. Remove the left cover.
See P.76
[1]
A034F2C101DA
[1]
[2]
[1]
A034F2C036DA
[3] [1]
[2]
A034F2C055DA
44292401TH Rev.1
2. Remove the harness from two wire
saddles [1].
3. Remove three screws [1], and
remove the plate [2].
4. Remove the screw [1] and discon-
nect the connector [2], and remove
the registration roller solenoid [3].
NOTE
• Use care not to lose the two
springs.
6.3.28 2nd image transfer pressure/retraction solenoid (SD4)
7.3.28 2nd image transfer pressure/retraction solenoid (SD4)
1. Remove the rear cover.
See P.76
2. Remove the left cover.
See P.76
A034F2C006DA
[1]
A034F2C057DA
[2] [1]
[3]
A034F2C058DA
MAINTENANCE
3. Disconnect all connectors and flat
cables from the printer control board.
4. Remove the harness from the har-
ness guide [1] to remove it.
5. Remove the screw [1] and discon-
nect the connector [2], and remove
the 2nd image transfer pressure/
retraction solenoid [3].
NOTE
• Use care not to lose the two
springs.
92 /