Oki MC160MFP Maintenance Manual page 92

Oki Data CONFIDENTIAL
[2] [1]
A034F2C045DA
7.3.25 Exit tray cooling fan motor (FM4)
6.3.25 Exit tray cooling fan motor (FM4)
1. Remove the IR unit.
See P.85
2. Remove the auto document feeder unit.
See P.87
[2]
[1]
A034F2C105DA
[2]
[1]
A034F2C106DA
5. Repeat the steps 3 and 4 to remove the arm unit located on the opposite side.
44292401TH Rev.1
4. Unhook the tab [1], remove the
ozone ventilation fan motor [2].
3. While pressing down the plate [1],
move the spring assy [2] in the direc-
tion of the arrow.
4. Remove the screw [1], and remove
the arm unit [2].
[1] [2]
[1]
A034F2C107DA
[2]
[1] [3]
A034F2C108DA
7.3.26 Tray1 media feed solenoid (SD1)
6.3.26 Tray1 media feed solenoid (SD1)
1. Remove the media feed driving unit.
See P.84
[2]
[1]
A034F2C054DA
MAINTENANCE
6. Remove six screws [1], and remove
the IR unit lower cover assy [2].
7. Remove the connector [1] and move
the fixing members [2] in the direc-
tion of the arrow to remove the exit
tray cooling fan motor [3].
2. Remove the screw [1], and remove
the tray1 media feed solenoid [2].
NOTE
• Use care not to lose the two
springs.
91 /