Oki MC160MFP Maintenance Manual page 177

Oki Data CONFIDENTIAL
Bit
Designation
No.
"0"= Invalid
31
"1"= T.6 coding capability
"0"= Without
32 Extend field
"1"= With
"0"= Invalid
33
"1"= Field not valid capability
"0"= Invalid
34
"1"= Multiple selective polling capability
"0"= Invalid
35 "1"= Polling sub address transmission (DTC) by Polled Sub
Address (DIS)/PSA
"0"= Invalid
36
"1"= T.43 coding
"0"= Invalid
37
"1"= Plane interleave
38 Set to "0"
39 Set to "0"
"0"= Without
40 Extend field
"1"= With
"0"= Invalid
41
"1"= R8 x 15.4 lines/mm
"0"= Invalid
42
"1"= 300 x 300 pels/25.4 mm
"0"= Invalid
43
"1"= R16 x 15.4 lines/mm and/or 400 x 400 pels/25.4 mm
"0"= Invalid
44
"1"= Inch based resolution preferred
"0"= Invalid
45
"1"= Metric based resolution preferred
Minimum scan line
"0": T 15.4 = T 7.7
46 time capability for
"1": T 15.4 = 1/2 T 7.7
higher resolutions.
"0"= Invalid
47 "1"= Selective polling (DIS)/ Selective polling transmission
(DTC)
0: Without
48 Extend field
1: With
"0"= Invalid
49
"1"= Sub Addressing capability
"0"= Invalid
50 "1"= Password/ Sender Identification capability (DIS)/
Password transmission (DTC)
"0"= Invalid
51
"1"= Ready to transmit a data file (polling)
52 Set to "0"
"0"= Invalid
53
"1"= Binary File Transfer (BFT)
44292401TH Rev.1
DIS/DTC DCS
"0"= Invalid
"1"= T.6 coding enabled
Set to "0"
Set to "0"
Resolution type selection
"0"= metric based resolution
"1"= inch based resolution
Do not care
Do not care
Set to "0"
"0"= Invalid
"1"= Sub Addressing transmission
"0"= Invalid
"1"= Sender Identification transmis-
sion
Set to "0"
Bit
Designation DIS/DTC
No.
"0"= Invalid
54
"1"= Document Transfer Mode (DTM)
"0"= Invalid
55
"1"= EDIFACT Transfer (EDI)
0: Without
56 Extend field
1: With
"0"= Invalid
57
"1"= Basic Transfer Mode (BTM)
58 Set to "0"
"0"= Invalid
59 "1"= Ready to transmit a character or mixed mode docu-
ment (polling)
"0"= Invalid
60
"1"= Character mode
61 Set to "0"
"0"= Invalid
62
"1"= Mixed mode
63 Set to "0"
"0"= Without
64 Extend field
"1"= With
"0"= Invalid
65
"1"= Processable mode 26
"0"= Invalid
66
"1"= Digital network capability
Duplex and half "0"= Half duplex operation only
67
duplex capabilities "1"= Duplex and half duplex operation
"0"= Invalid
68
"1"= JPEG coding
"0"= Invalid
69
"1"= Full color mode
70 Set to "0"
"0"= Invalid
71
"1"= 12 bit/pixel/element
"0"= Without
72 Extend field
"1"= With
"0"= Invalid
73
"1"= No sampling (1:1:1)
"0"= Invalid
74
"1"= Nonstandard radiation light
"0"= Invalid
75
"1"= Nonstandard is mute range
"0"= Invalid
76 "1"= North American Letter (215.9 mm × 279.4 mm) capac-
ity
ADJUSTMENT/SETTING
DCS
Set to "0"
"0"= Half duplex operation only
"1"= Duplex operation
"0"= Invalid
"1"= Preferred Huffmann tables
"0"= Invalid
"1"= North American Letter (215.9
mm × 279.4 mm)
176 /