Main Machine Final Installation - Ricoh Neptune-P1 Service Manual

• Roll Feeder, Paper Cassette See p.43 "Roll Feeder (B852)", p.61 "Paper Cassette (B853)"
• MFP Options. See p.91 "Installation of MFP Options".
• After installing all options (other than the folder unit/manual feeder), complete main machine
installation. See p.37 "Main Machine Final Installation".
• Folder Unit, Manual Feed. See p.64 "Folder Unit (B889)",p.83 "Manual Feeder
(D333)".
• The Folder Unit and Manual Feed Unit must be installed after the main machine has been
completely installed and leveled.

Main Machine Final Installation

Select the Tray Paper Size and Type
• Selections are shown only for installed options. If you installed all the options, you will see "Tray Paper
Size: Tray 1" (1st Roll), "Tray Paper Size: Tray 2" (2nd Roll), and "Tray Paper Size: Tray 3" (Cassette).
Select the paper size and paper type for the paper feed source.
1. [Menu].
2. []> "Paper Input"> [OK]
3. []> "Paper Size"> "Paper Size: Tray 1"> [OK]
4. [] or []> Display the desired paper size.
5. [] or []> Select the size in the left or right column> [OK]> "Programmed"
6. [] or []> "Paper Type: Tray 1"> [OK]
7. [] or []> Select the desired paper type.
• "Plain Paper" is the default setting. This setting is not required if plain paper is loaded in the paper
feed source.
• No Display (Plain Paper)
• Recycled Paper
• Translucent Paper
• Film
8. [OK]> "Programmed". The display returns to the previous level, so that you can do more settings.
9. Repeat this procedure for other paper feed sources.
Main Machine Installation (G180)
1
37