Developer - Ricoh Neptune-P1 Service Manual

Development

Developer

3
1. Remove the development unit (See p.126 "Development Unit".)
• Do not bend the bias terminal.
2. Put the development unit on a large sheet of paper.
3. Remove the casing [A] for the toner supply unit ( x 2)
4. Remove the development filter [B] and bracket [C].
5. Hold the development unit above the paper with the gears up.
6. Turn the paddle roller knob [D] clockwise until all developer is out of the unit.
7. Clean the development unit (especially the right end), the development filter, and development filter
bracket.
127