Pressure Roller Thermistors - Ricoh Neptune-P1 Service Manual

3. Replacement and Adjustment
2. Remove fusing exit sensor [A] (White  x 1,  x 1)

Pressure Roller Thermistors

3
1. Remove:
• Rear cover (See p.113 "Rear Cover")
• Paper exit unit (See p.113 "Paper Exit Unit")
2. Remove pressure roller thermistors [A] ( x 1,  x 2, x1).
• The end roller thermistor is at
• The center roller thermistor is at
• You must first remove the stripper unit [B] in order to remove the center thermistor
152
.
.
.