Toner Hopper Cover - Ricoh Neptune-P1 Service Manual

3. Remove the screws [D] on both ends of the top ( x2).
4. Raise the top [E] and pull it completely forward.
• The top must be completely forward so that it remains open under its own weight.

Toner Hopper Cover

1. Side covers. (See p.112 "Side Covers".)
2. Open the upper unit.
3. Toner hopper cover [A].
Reinstallation
• Make sure that the bent edge of the mylar [B] covers the edge of the plate as shown.
Common Procedures
3
115