Fusing; Pressure Spring Adjustment - Ricoh Neptune-P1 Service Manual

3. Replacement and Adjustment

Fusing

Pressure Spring Adjustment

3
1. Open the exit cover and exit unit together.
2. To adjust the pressure, disconnect the spring [A] and connect it to a different hole.
• Center: Standard tension, standard pressure.
• Left: Less tension, less pressure. Set to this position to decrease wrinkling
• Right: More tension, more pressure. Can give better fusing with thick paper.
• Wrinkling occurs more frequently with some types of paper or film. Adjust the tension of the spring
only when necessary.
150