Table of Contents
Advertisement
C
ONFIGURING THE
Level Severity Name
3
2
1
0
* There are only Level 2, 5 and 6 error messages for the current firmware
release.
•
RAM Level – Limits log messages saved to the switch's temporary
RAM memory for all levels up to the specified level. For example, if
level 7 is specified, all messages from level 0 to level 7 will be logged to
RAM. (Range: 0-7, Default: 7)
Note: The Flash Level must be equal to or less than the RAM Level.
Web – Click System, Log, System Logs. Specify System Log Status, set the
level of event messages to be logged to RAM and flash memory, then click
Apply.
3-34
S
WITCH
Table 3-3 Logging Levels (Continued)
Error
Critical
Alert
Emergency
Figure 3-15 System Logs
Description
Error conditions (e.g., invalid input, default
used)
Critical conditions (e.g., memory allocation, or
free memory error - resource exhausted)
Immediate action needed
System unusable
Advertisement
Table of Contents
