Table 4-2 Configuration Commands - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

• Line Configuration - These commands modify the console port and
Telnet configuration, and include command such as parity and
databits.
• VLAN Configuration - Includes the command to create VLAN
groups.
• Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.
To enter the Global Configuration mode, enter the command configure
in Privileged Exec mode. The system prompt will change to
"Console(config)#" which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
Mode Command
Line line {console | vty}
Access access-list ip standard
Control access-list ip extended
List access-list ip
mask-precedence
access-list mac
access-list mac
mask-precedence
Interface interface {ethernet port |
port-channel id| vlan id}
VLAN vlan database
MSTP spanning-tree
mst-configuration

Table 4-2 Configuration Commands

E
NTERING
Prompt
Console(config-line)#
Console(config-std-acl)
Console(config-ext-acl)
Console(config-ip-mask-acl)
Console(config-mac-acl)
Console(config-mac-mask-acl)
Console(config-if)#
Console(config-vlan)
Console(config-mstp)#
C
OMMANDS
Page
4-13
4-114
4-173
4-235
4-219
4-9