Web – Click System, Log, System Logs. Specify the System Log Status,
modify the level of messages to be logged to RAM and flash memory, and
then click Apply.
CLI – Enable system logging and then specify the level of messages to be
logged to RAM and flash memory. Use the show logging command to
display the current settings.
Console(config)#logging on
Console(config)#logging history ram 6
Console(config)#
Console#show logging flash
Syslog logging:
History logging in FLASH: level errors
Console#
Figure 3-15 System Logs
Enabled
B
C
ASIC
ONFIGURATION
4-59
4-60
4-64
3-35