Enabling Or Disabling Gvrp (Global Setting); Displaying Basic Vlan Information; Figure 3-72 Enabling Gvrp Status - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

Smc networks gigabit ethernet switch management guide

Hide thumbs Also See for SMC TigerStack 1000 SMC8724M:

Table of Contents

ONFIGURING THE

receives a tagged frame, it will pass this frame onto the VLAN(s) indicated

by the frame tag. However, when this switch receives an untagged frame

from a VLAN-unaware device, it first decides where to forward the frame,

and then inserts a VLAN tag reflecting the ingress port's default VID.

Enabling or Disabling GVRP (Global Setting)

GARP VLAN Registration Protocol (GVRP) defines a way for switches to

exchange VLAN information in order to register VLAN members on

ports across the network. VLANs are dynamically configured based on

join messages issued by host devices and propagated throughout the

network. GVRP must be enabled to permit automatic VLAN registration,

and to support VLANs which extend beyond the local switch.

(Default: Disabled)

Web – Click VLAN, 802.1Q VLAN, GVRP Status. Enable or disable

GVRP, and click Apply.

CLI – This example enables GVRP for the switch.

Console(config)#bridge-ext gvrp

Console(config)#

The VLAN Basic Information page displays basic information on the

VLAN type supported by the switch.