Show Map Ip Port - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

Example
The following example shows how to map IP DSCP value 1 to CoS
value 0.
Console(config)#interface ethernet 1/5
Console(config-if)#map ip dscp 1 cos 0
Console(config-if)#

show map ip port

Use this command to show the IP port priority map.
Syntax
show map ip port [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-24/48)
• port-channel channel-id (Range: 1-32)
Default Setting
None
Command Mode
Privileged Exec
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Console#show map ip port
TCP port mapping status: disabled
Port
--------- -------- ---
Eth 1/ 5
Console#
Related Commands
map ip port (Global Configuration) (4 -268)
map ip port (Interface Configuration) (4 -268)
Port no. COS
80 0
P C
RIORITY OMMANDS
4-273