Port Security; Table 4-31 Port Security Commands - SMC Networks SMC TigerStack 1000 SMC8724M Management Manual

C L
OMMAND INE
Command

port security

mac-address-table static Maps a static address to a port in a
show mac-address-table Displays entries in the
port security
This command enables or configures port security. Use the no form
without any keywords to disable port security. Use the no form with the
appropriate keyword to restore the default settings for a response to
security violation or for the maximum number of allowed addresses.
Syntax
port security [action {shutdown | trap | trap-and-shutdown}
| max-mac-count address-count]
no port security [action | max-mac-count]
• action - Response to take when port security is violated.
- shutdown - Disable port only.
- trap - Issue SNMP trap message only.
- trap-and-shutdown - Issue SNMP trap message and disable
• max-mac-count
- address-count - The maximum number of MAC addresses that can
Default Setting
Status: Disabled
Action: None
Maximum Addresses: 0
Command Mode
Interface Configuration (Ethernet)
4-102
I
NTERFACE

Table 4-31 Port Security Commands

Function
Configures a secure port
VLAN
bridge-forwarding database
port.
be learned on a port. (Range: 0 - 1024, where 0 means disabled)
Mode Page
IC 4-102
GC 4-206
PE 4-208