Table of Contents
Advertisement
CLI – This displays STA settings for instance 0, followed by settings for
each port. The settings for instance 0 are global settings that apply to the
IST (page 3-140), the settings for other instances only apply to the local
spanning tree.
Console#show spanning-tree mst 0
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode
Spanning tree enable/disable
Instance
Vlans configuration
Priority
Bridge Hello Time (sec.)
Bridge Max Age (sec.)
Bridge Forward Delay (sec.)
Root Hello Time (sec.)
Root Max Age (sec.)
Root Forward Delay (sec.)
Max hops
Remaining hops
Designated Root
Current root port
Current root cost
Number of topology changes
Last topology changes time (sec.):645
Transmission limit
Path Cost Method
---------------------------------------------------------------
Eth
1/ 1 information
---------------------------------------------------------------
Admin status:
Role:
State:
External admin path cost: 100000
Internal admin path cost: 100000
External oper path cost:
Internal oper path cost:
Priority:
Designated cost:
Designated port:
Designated root:
Designated bridge:
Fast forwarding:
Forward transitions:
Admin edge port:
Oper edge port:
Admin Link type:
Oper Link type:
Spanning Tree Status:
.
.
.
S
T
PANNING
REE
:MSTP
:enabled
:0
:1-4093
:32768
:2
:20
:15
:2
:20
:15
:20
:20
:32768.0.0000ABCD0000
:1
:200000
:1
:3
:long
enabled
designate
forwarding
100000
100000
128
0
128.1
4096.0.0030F1DF9CA0
4096.0.0030F1DF9CA0
disabled
2
disabled
disabled
auto
point-to-point
enabled
A
C
LGORITHM
ONFIGURATION
4-233
3-161
Advertisement
Table of Contents
