C
L
OMMAND
INE
Example
Console#show mac access-group
Interface ethernet 1/5
MAC access-list M5 out
Console#
Related Commands
mac access-group (4-141)
map access-list mac
This command sets the output queue for packets matching an ACL rule.
The specified CoS value is only used to map the matching packet to an
output queue; it is not written to the packet itself. Use the no form to
remove the CoS mapping.
Syntax
[no] map access-list mac acl_name cos cos-value
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• cos-value – CoS value. (Range: 0-7)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• You must configure an ACL mask before you can map CoS values to
the rule.
• A packet matching a rule within the specified ACL is mapped to one
of the output queues as shown below.
Priority
Queue
4-142
I
NTERFACE
Table 4-37 Egress Queue Priority Mapping
0
1
1
2
2
3
4
0
3
4
5
6
7
5
6
7