Table of Contents
Advertisement
C
ONFIGURING THE
•
IGMP Version — Sets the protocol version for compatibility with
other devices on the network. (Range: 1-2; Default: 2)
Notes: 1. All systems on the subnet must support the same version.
2. Some attributes are only enabled for IGMPv2, including
Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP
settings as required, and then click Apply. (The default settings are shown
below.)
CLI – This example modifies the settings for multicast filtering, and then
displays the current status.
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping querier
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-interval 100
Console(config)#ip igmp snooping query-max-response-time 20
Console(config)#ip igmp snooping router-port-time 300
Console(config)#ip igmp snooping version 2
Console(config)#exit
Console#show ip igmp snooping
Service status:
Querier status:
Query count:
Query interval:
Query max response time: 20 sec
Router port expire time: 300 sec
IGMP snooping version:
Console#
3-204
S
WITCH
IGMP Report Delay and IGMP Query Timeout.
Figure 3-93 IGMP Configuration
Enabled
Enabled
10
100 sec
Version 2
4-277
4-281
4-281
4-282
4-283
4-284
4-278
4-279
Advertisement
Table of Contents
