Table of Contents
Advertisement
Default Setting
443
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same
port.
• If you change the HTTPS port number, clients attempting to connect
to the HTTPS server must specify the port number in the URL, in this
format: https://device:port_number
Example
Console(config)#ip http secure-port 1000
Console(config)#
Related Commands
ip http secure-server (4-41)
Telnet Server Commands
Command
ip telnet server
ip telnet server port Specifies the port to be used by the Telnet
ip telnet server
This command allows this device to be monitored or configured from
Telnet. Use the no form to disable this function.
Syntax
[no] ip telnet server
Table 4-14 Telnet Server Commands
Function
Allows the switch to be monitored or
configured from Telnet
interface
S
M
YSTEM
ANAGEMENT
C
OMMANDS
Mode Page
GC
4-43
GC
4-44
4-43
Advertisement
Table of Contents
