Telnet Server Commands; Ip Telnet Server; Ip Telnet Server Port; Table 4-14 Telnet Server Commands - SMC Networks 8748L2 Management Manual

Telnet Server Commands

Command

ip telnet server

ip telnet port
ip telnet server
This command allows this device to be monitored or configured from
Telnet. Use the no form to disable this function.
Syntax
[no] ip telnet server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#ip telnet server
Console(config)#

ip telnet server port

This command specifies the TCP port number used by the Telnet
interface. Use the no form to use the default port.
Syntax
[no] ip telnet port [port-number]
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)

Table 4-14 Telnet Server Commands

Function
Allows the switch to be monitored or
configured from Telnet
Specifies the port to be used by the Telnet
interface
S M
YSTEM ANAGEMENT
C
OMMANDS
Mode Page
GC 4-43
GC 4-43
4-43