Entering Destinations; Entering A Destination Number Using The Numeric Keys - Sharp MX-M6570 User Manual

FACSIMILE►ENTERING DESTINATIONS

ENTERING DESTINATIONS

This section explains how to enter a destination from the initial screen of easy mode.
SELECTING FAX MODE (page 4-7)
►
ENTERING DESTINATIONS

ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS

Prohibit transmission when the fax number/address is entered manually
In "Settings (administrator)", select [System Settings] → [Image Send Settings] →[Common Settings] → [Enable/Disable
Settings] → [Settings to Disable Transmission] → [Disable Direct Entry].
Prohibit manual entry of fax numbers and addresses.
Configure the setting for each of the following items:
• E-Mail
• Network Folder
• Internet Fax (Including Direct SMTP)
• Fax
1
Original
Address
8½x11
Address Book
CA
Preview
Entering a Pause Between Digits of the Number
Enter a pause after the number used to dial out from a PBX (for example, after "0"), or after the country code when
dialing an international number.
Tap the [Pause] key.
1
A hyphen "-" is entered when the [Pause] key is tapped once.
If you want to enter a pause between digits of the number:
Enter a pause after the number used to dial out from a PBX (for example, after "0"), or after the country code when
dialing an international number.
The [Pause] key appears on the numeric keys when the destination fax number is entered.
A hyphen "-" is entered when the [Pause] key is tapped once.
To set the length of pause:
In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Pause Time Setting].
Fax Number Detail
Sending History Direct Entry
Start
Tap the [Direct Entry] key or [Fax
Number] to enter the destination fax
number.
If you want to specify multiple destinations, tap
enter the next fax number.
If you enter an incorrect number, tap the [C] key to delete the
number and re-enter.
4-11
and