Sharp MX-M6570 User Manual page 135

BEFORE USING THE MACHINE►HOW TO PLACE THE ORIGINAL
Allowed original sizes
Minimum original size
Standard size
(Minimum size that can be automatically detected)
5-1/2" (longitudinal) × 8-1/2" (transversal)
148 mm (longitudinal) × 210 mm, or A5
Non-standard size
(Minimum size that can be specified manually)
5-1/8" (longitudinal) × 5-1/2" (transversal)
131 mm (longitudinal) × 140 mm (transversal)
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
COPIER: "SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page
►
FAX: "SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page
►
IMAGE SEND: "SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page
►
Allowed original weights
1-sided scanning: 35 to 128 g/m
2-sided scanning: 50 to 128 g/m
To scan originals from 9 to 13- lbs Bond (35 to 49g/m
without using "Slow Scan Mode" may result in original misfeeds.
When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.
Make sure that there is no original on the document glass.
1
2
Below the indicator line
2
(9 to 32 lbs Bond)
2
(13 to 32 lbs Bond)
2 ), use "Slow Scan Mode" in the "Others" function. Scanning
Align the edges evenly
and face them up
Insert to the end
Fit to the Original Size
1-132
Maximum original size
Standard size
(Maximum size that can be automatically detected)
11" (longitudinal) × 17" (transversal)
297 mm (longitudinal) × 420 mm (transversal) or A3
12" × 18" (A3W) cannot be used.
Non-standard size
(Maximum size that can be specified manually)
Copy mode:
11-5/8" (longitudinal) × 17" (transversal)
297 mm (longitudinal) × 432 mm (transversal)
image send mode:
11" (longitudinal) × 39-3/8" (transversal)
297 mm (longitudinal) × 1000 mm (transversal)
Place the original.
Up to 150 sheets can be inserted.
After scanning is finished on the automatic document feeder,
remove originals from the original exit tray.
2-28)"
4-43)"
5-51)"