Sharp MX-M6570 User Manual page 259

COPIER►BASIC PROCEDURE FOR MAKING COPIES
Staple ON (excluding booklet)
Tap the [Staple / Punch] key.
1
► COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-28)
2
Staple / Punch
Staple
Off
Punch
Off
CA
Preview
In normal mode
• Tap the [Output] key, and tap the [Staple] tab.
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray Offset
Sort/Group Staple
Off
1 Staple
Trimmer
2 Staples
Setting
Others
• If you need to change the output tray, tap the [Output Tray] key and select the output destination before selecting
stapling.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap [Continue] or [Cancel].
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
Position
Copies
Original
No. of copies
Change Size/Direction.
2-Sided Copy
N-Up
Output Tray
Put Multiple Pages in A Page
Right Tray
Margin Shift
Shift Position to Have Margin
Erase
Separator Page
Erase Shadow Around
Punch Fold
Position
Left Preview
Saddle
Stitch Top
Proof Copy
Original
Right
3 8½x14
11x17 8½x11
4
Select the number of staples and
staple position.
• After the settings are completed, tap
• A binding position cannot be selected for stapleless
stapling.
Start
CA
Start
2-40
.