Sharp MX-M6570 User Manual page 796

Digital multifunctional system

Hide thumbs Also See for MX-M6570:

Table of Contents

MANUAL FINISHING►OPERATION OF MANUAL FINISHING

TO CHANGE THE PAPER TRAY

The paper tray is automatically detected when paper is loaded in the inserter.

If you need to specify a paper tray when, for example, paper has been loaded into both the upper and lower trays on the

inserter, tap the [Upper Tray] or [Lower Tray] key to specify the appropriate paper tray.

TO CHANGE THE OUTPUT TRAY

The output tray is automatically selected based on the output function you set. If Z-Fold, Half Fold, or Punch is selected,

you can select the upper, middle or lower tray for the output tray.

Tap the [Upper Tray], [Middle Tray] or [Lower Tray] key in "Output Tray" and select the output tray you require.

Relation between output function and output tray

An output tray is automatically selected as shown below based on the output function you set. Depending on the output

function that is originally deselected, it may be deselected if you tap the [Upper Tray], [Middle Tray] or [Lower Tray] key

to change the output tray.

For example, if you tap the [Upper Tray], [Middle Tray] or [Lower Tray] key with "Saddle Stitch" selected, the setting for

"Saddle Stitch" is canceled.

Output function

Z-Fold/Half Fold/Punch

Saddle Stitch/Saddle Fold

C-Fold/Accordion Fold/Double

Type and Size

Copies/Pages

Type and Size

Copies/Pages

Upper Tray (A) or Lower Tray (C)

Upper Tray (A), Middle Tray (B) or

Lower Tray (C)

Saddle Stitch Tray (D)

Folding Unit Tray (E)

Chapters

Table of Contents