Sender-Related Features; Adding Your Sender Information To Faxes (Fax Own Number Sending) - Sharp MX-M6570 User Manual

FACSIMILE►OTHERS FUNCTION

SENDER-RELATED FEATURES

ADDING YOUR SENDER INFORMATION TO FAXES
(FAX OWN NUMBER SENDING)
Your sender information (date, time, sender name, sender fax number or destination name, number of pages) is
automatically added to the top of each fax page you transmit.
Example of the sender information printed
(1) Date, time: The date and time of transmission.
(2) Sender name: The sender name programmed in the machine.
(3) Sender fax number or destination name (one-touch key name)
(4) Page numbers: Page number/total pages
If destination name is set to be attached and the destination is not specified using a one-touch key, this information is not
added to the fax and not printed.
Outside scanned image
(factory default setting)
Sender
information
Originals
The transmitted image length will be
length of sender information +
length of original image. When the
fax is printed by the receiving
machine, it may be reduced or
divided onto two pages.
2017/02/02/ Fri . 15:00
(1)
Load
Sender
information
Originals
The sender information is printed
inside the original image, and
thus the transmitted image length
is the length of the original. Note
that the sender information will
overlap part of the original image
(the overlapped part of the
original image will not appear).
AAAAA FAX No.: 0123456789
(2) (3)
4-95
P.001/001
(4)