Sort/Group Setting - Sharp MX-M6570 User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

SORT/GROUP SETTING

This section explains how to select the sorting method when outputting the scanned original.
Enables the sort mode when the original is placed in the automatic document feeder, and enables the group
Auto
mode when the original is placed on the document glass.
Sort Sorts the scanned original on a set basis, and
outputs them.
Group Groups the scanned original on a page basis,
and outputs them.
Tap the [Detail] key to change to normal mode.
1
► CHANGING MODES (page 1-19)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-28)
Tap the [Output] key.
2
3
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray
Offset
Sort/Group Staple
Auto
Sort
Group
Others
• You can select the offset output checkbox
easy removal from the output tray.
• To change the output tray, tap the [Output Tray] key, and select the output destination.
Original
No. of copies 1
Change Size/Direction.
2-Sided Copy
N-Up
Output Tray
Put Multiple Pages in A Page
Right Tray
Margin Shift
Shift Position to Have Margin
Erase
Separator Page
Erase Shadow Around
Punch Fold
Preview
Proof Copy
3 B4
4 A3 A4
Originals
When 5 is set for the
number of copies
Originals
When 5 is set for the
number of copies
Tap the [Sort/Group] tab, and tap the
[Auto], [Sort] or [Group] key.
After the settings are completed, tap
CA
Start
to have each set of output be offset from the previous set to enable
2-38
Finished
Finished
.