Sharp MX-M6570 User Manual page 800

SYSTEM SETTINGS►SETTING MODE
Displaying the setting mode (Web version)
When the machine is connected to the network, access the built-in Web server of the machine using the PC's Web
browser.
From the setting mode of the machine, print the IP address of the machine and enter the address on the PC's Web
browser.
1
Easy
Copy
Toner Quantity Bk
Tap [Status] → [Network Status] from the menu.
2
3
Status User Control
Machine Identification
Total Count
Device Status
Network Status
Firmware Version
Power Reset
Data List
List for User
List for Administrator
4
10:15 AM
Easy Print Release Sharp OSA
Scan
Operation Enlarge Settings Total Count LCD Control Job Status
Guide Display Mode
Administrator Login
System
Settings
Status > Network Status
TCP/IP
TCP/IP: Enable
IPv4 Settings:
DHCP: Enable
IPv4 Address: xxx.xxx.xxx.xxx
Subnet Mask: xxx.xxx.xxx.xxx
Default Gateway: xxx.xxx.xxx.xxx
IPv6 Settings:
Top of Page
Tap the [Settings] key.
Scroll the screen down and check
"IPv4 Address" in IPv4 Settings of
TCP/IP.
Start the Web browser on the PC, and
enter the IP address of the machine.
Start a Web browser on a PC on the same network the
machine is on, and enter the IP address of the machine.
Recommended Web browsers:
Internet Explorer: 11 or later (Windows
Microsoft Edge (Windows
®
Safari (Mac OS ), Chrome (Windows
Latest version or immediately previous major release
Depending on the machine settings, user authentication
may be required to display the setting mode (Web version).
For password and other information required for user
authentication, contact the administrator of the machine.
8-4
® )
® ®
), Firefox (Windows ),
®
):