Making Copies Using The Bypass Tray - Sharp MX-M6570 User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

MAKING COPIES USING THE BYPASS TRAY

MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, labels, tab paper, and other
special media.
For detailed information on paper that can be loaded into the bypass tray, see
For precautions on loading paper into the bypass tray, see
Prohibit feeding of paper from the bypass tray when performing duplex copy.
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Disabling of Bypass-Tray
in Duplex Copy].
Disables the use of the bypass tray when making 2-sided copies.
The bypass tray is often used to feed label sheets, transparency film, and other special media for which 2-sided copying is
prohibited. If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the unit may result. If
special media for which 2-sided copying is prohibited is often used, it is recommended that you enable this setting.
Load paper into the bypass tray.
1
► LOADING PAPER INTO THE BYPASS TRAY (page 1-121)
Tap the [Paper Select] key, and tap the bypass tray key.
2
Each tray key displays the size and type of the loaded paper.
► SELECTING THE PAPER TRAY FOR COPYING (page 2-11)
To select more detailed settings, tap the [Detail] key to switch to normal
3
mode.
► CHANGING MODES (page 1-19)
Tap the [Paper Select] key.
4
5
Paper Select
Paper Tray
8½x11
Plain 1
8½x14
Plain 1
11x17
Plain 1
1 2
3
4
Others
Place the original.
6
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-131)
► DOCUMENT GLASS (page 1-133)
Change Current Type and
No. of copies
1
Size of Selected Tray
Original
Change Size/Direction.
Large Capacity Tray
Copy Ratio
8½x11
8½x11
Enlarge/Reduce Copy
Plain 1 Plain 1
2-Sided Copy
Margin Shift
Shift Position to Have Margin
Bypass Tray
Preview
8½x11
Plain 1
Proof Copy
5
Type and Size
3 8½x14
4 11x17 8½x11
"APPLICABLE PAPER TYPES (page
"LOADING PAPER INTO THE BYPASS TRAY (page
Tap the [Type and Size] key, and select
the size and type of the paper.
► SPECIFYING A TYPE AND SIZE OF PAPER LOADED
ON BYPASS TRAY (page 2-34)
CA
Start
2-33
1-106)".
1-121)".