Sharp MX-M6570 User Manual page 263

COPIER►BASIC PROCEDURE FOR MAKING COPIES
4
Booklet
Select Output Binding Edge.
Off
Left Binding/
Tablet
Right Binding
Others
• The original will be scanned from the innermost side when folded.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Divide],
[Continue], or [Cancel] key.
[Divide]:
[Continue]:
[Cancel]:
To cancel the Saddle Stitch:
Tap the [Off] key.
Trimmer Setting
1
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray
Offset
Sort/Group Staple
Off
Saddle
1 Staple
Stitch
Trimmer
2 Staples
Setting
Others
2
Output
Trimmer Setting
Set Trimming Width.
Off
On
Others
To cancel the Trimmer Setting:
Tap the [Off] key.
Original
1
No. of copies
Change Size/Direction.
N-Up
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
Select Original Type. Erase
Erase Shadow Around
1-Sided
2-Sided
Booklet
2-Sided
Tablet
Preview
Proof Copy
Cover Setting
3 8½x14
11x17
4 8½x11
Divides the pages into sets that can be stapled and sorts them. You cannot use this function if the
cover settings are selected.
Continues sorting without stapling.
Cancels the staple sort setting.
Original
1
No. of copies
Change Size/Direction.
N-Up
Put Multiple Pages in A Page
Margin Shift
Output Tray
Shift Position to Have Margin
Right Tray
Erase
Erase Shadow Around
Separator Page
Punch Fold
Preview
Proof Copy
Original
3 8½x14
4 11x17 8½x11
Erase
1
No. of copies
Erase Shadow Around
Full Bleed Copy
( 2.0~20.0 )
2 0
mm
Preview
Proof Copy
3 8½x14
4 11x17 8½x11
Tap the [Left Binding/Tablet] or [Right
Binding] key to select an original and
configure the cover sheet setting.
After the settings are completed, tap
CA
Start
When Saddle Stitch is selected, tap the
[Trimmer Setting] key.
CA
Start
Tap the [On] key, and specify the
trimming width.
Tap the numeric value display field of the trimming width,
and enter the allowable range using the numeric keys.
Otherwise, tap
.
CA
Start
2-44
.
. After the settings are completed, tap