Settings Before Forwarding - Sharp MX-M6570 User Manual

FACSIMILE►FAX RECEPTION
Tap the [Execute] key in [Forward Received Data] to begin forwarding.
3
If a PIN Code entry screen appears, the "Hold Setting for Received Data Print" has been enabled. Enter the PIN Code
using the numeric keys to begin forwarding.
► PRINTING A PIN CODE-PROTECTED FAX (Hold setting for received data print) (page 4-56)

SETTINGS BEFORE FORWARDING

Select [System Settings] in "Settings (administrator)" → [Image Send Settings] → [Fax Data Receive/Forward (Manual)].
Fax Data Receive/Forward (Manual)
This section explains settings for fax reception and forwarding.
Fax Settings
Item
Receive Settings
Multiple Set Print
Staple
Forward Received Data
• If there is no forwarding data or if the destination is not registered, no data is forwarded.
• If "PRINTING A PIN CODE-PROTECTED FAX (Hold setting for received data print) (page
prompted to enter a password. Enter the correct password using numeric keys.
• If some pages of a fax that is being forwarded were successfully printed, only those pages that were not printed will be
forwarded.
• A forwarded fax becomes a fax transmission job. If transmission does not take place because the transmission was
canceled or an error occurred, the fax will be held in memory until it can be printed.
• All faxes received are forwarded. Note that the received data stored in the F-code confidential memory box is not
forwarded.
• For destination number registration, see
Set the fax reception method. Auto Reception: When a call comes in, the machine rings
and then automatically begins fax reception.
• Auto Reception:
• Manual Reception:
Specify whether or not two or more copies of received faxes will be printed. The number of
copies can be set with the "Fax Output Settings".
Specify whether or not stapling is performed. (Only when a finisher is installed)
When the machine cannot print because it is out of paper or out of toner, received faxes
can be forwarded to another previously stored fax machine.
"Set the Telephone Number for Data Forwarding (page
4-61
Settings
When a call comes in, the machine rings and then
automatically begins fax reception.
Used when an existing extension telephone is connected to
the machine. You can answer to a phone call first, and then
receive a fax by manual operation.
4-56)" is enabled, you are
4-54)".