Output - Sharp MX-M6570 User Manual

Digital multifunctional system

Hide thumbs Also See for MX-M6570:

Table of Contents

COPIER►BASIC PROCEDURE FOR MAKING COPIES

OUTPUT

Configure the output settings for copies using Sort, Group, Offset, Separator Page, Staple, Punch, or Fold. Also specify

the output destination of copies.

You can tap the [Output] key in normal mode to configure settings for all output functions.

Settings for the staple and punch functions can also be configured from simple mode.

No. of copies

[Output] screen of normal mode

Specify the destination to output copies.

If a finisher (large stacker) or saddle stitch finisher (large stacker) is installed, you can select [Upper Tray], [Middle Tray],

or [Lower Tray].

If a finisher or saddle stitch finisher is installed, you can select [Top Tray] or [Finisher Tray].

CHANGING OUTPUT DESTINATION (page 2-37)

This function outputs copies while shifting them set by set. Setting the checkbox to

setting it to

disables the function.

Offset enabled

This function is available when a finisher or saddle stitch finisher is installed and [Upper Tray], [Lower Tray] or [Finisher Tray]

is selected as the output tray.

Selecting the staple function clears the Offset checkmark automatically.

Change Size/Direction.

2-Sided Copy

Put Multiple Pages in A Page

Margin Shift

Shift Position to Have Margin

Separator Page

Erase Shadow Around

Offset disabled

enables the offset function, and

Table of Contents