Sharp MX-M6570 User Manual page 236

Digital multifunctional system

Hide thumbs Also See for MX-M6570:

Table of Contents

COPIER►BASIC PROCEDURE FOR MAKING COPIES

2-Sided Copy

Depending on the size of the placed original, there may be cases where the same size of paper as the original is not

selected automatically. In this event, change the paper tray manually.

Tap the [Start] key.

Place next original. Press [Start].

When finished, press [Read-End].

Tap the [Read-End] key to start copying.

Staple / Punch

Staple / Punch

Check the paper (tray) you want to use

for copying, and tap the keys for any

other settings you want to select.

Tap the [Original] key and specify the orientation of the

original to have the orientation be correctly recognized.

► Specifying the orientation of the original (page 2-28)

• Paper Select

• Copy Ratio

• Staple / Punch

Set the next original, and tap the

[Start] key to scan the original.

Tap the same key you tapped in step 5.

Repeat this step until all originals have been scanned.

Chapters

Table of Contents