Making Copies Using The Bypass Tray; Specifying A Type And Size Of Paper Loaded On Bypass Tray - Sharp MX-M905 User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

MAKING COPIES USING THE BYPASS TRAY

MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, tab paper, and other special
media.
For detailed information on paper that can be loaded into the bypass tray, see
For precautions on loading paper into the bypass tray, see
Load paper into the bypass tray.
1
► LOADING PAPER INTO THE BYPASS TRAY (page 1-83)
Tap the [Paper Select] key, and tap the bypass tray key.
2
Each tray key displays the size and type of the loaded paper.
► SELECTING THE PAPER TRAY FOR COPYING (page 2-13)
To select more detailed settings, tap the [Detail] key to switch to normal
3
mode.
► Changing mode from each mode (page 2-5)
Tap the [Paper Select] key.
4
5
Paper Select
Paper Tray
8½x11
1 2
Plain 1
8½x14
3
Plain 1
11x17
4
Plain 1
1 2
3
4
Others
Place the original.
6
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-89)
► DOCUMENT GLASS (page 1-91)
Tap the [Start] key to start copying.
7
Change Current Type and
No. of copies
1
Size of Selected Tray
Original
Change Size/Direction.
Large Capacity Tray
Copy Ratio
8½x11
8½x11
Enlarge/Reduce Copy
Plain 1 Plain 1
2-Sided Copy
Margin Shift
Shift Position to Have Margin
Bypass Tray
Preview
8½x11
Plain 1
Proof Copy
5
Type and Size
3 8½x14
8½x11
4 11x17
"APPLICABLE PAPER TYPES (page
"LOADING PAPER INTO THE BYPASS TRAY (page
Tap the [Type and Size] key, and select
the size and type of the paper.
► SPECIFYING A TYPE AND SIZE OF PAPER LOADED
ON BYPASS TRAY (page 2-36)
CA
Start
2-35
1-63)".
1-83)".