Making Copies Using The Bypass Tray - Sharp MX-3050N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

MAKING COPIES USING THE BYPASS TRAY

MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and
other special media.
For detailed information on paper that can be loaded into the bypass tray, see
For precautions on loading paper into the bypass tray, see
Load paper into the bypass tray.
1
► LOADING PAPER INTO THE BYPASS TRAY (page 1-71)
Tap the [Paper Select] key, and tap the bypass tray key.
2
Each tray key displays the size and type of the loaded paper.
► SELECTING THE PAPER TRAY FOR COPYING (page 2-13)
To select more detailed settings, tap the [Detail] key to switch to normal
3
mode.
► Changing mode from each mode (page 2-5)
Tap the [Paper Select] key.
4
5
Paper Select
Paper Tray
A4
1
Plain
B5
2
Plain
B4
3
Plain
A3
4
Plain
Others
Place the original.
6
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-77)
► DOCUMENT GLASS (page 1-79)
Tap the [Colour Start] or [B/W Start] key to start copying.
7
Change Type and Size of
No. of copies
1
Tray Specified Currently
Original
Change Size/Direction.
Copy Ratio
Bypass Tray
Enlarge/Reduce Copy
A4
2-Sided Copy
Plain
Margin Shift
Type and Size
Shift Position to Have Margin
Preview
B/W Colour
Start Start
4 A3
"APPLICABLE PAPER TYPES (page
"LOADING PAPER INTO THE BYPASS TRAY (page
Tap the [Type and Size] key, and select
the size and type of the paper.
► SPECIFYING A TYPE AND SIZE OF PAPER LOADED
ON BYPASS TRAY (page 2-40)
CA
2-39
1-62)".
1-71)".