Reverse this procedure to install the bottom cover.
Display EDP cable
NOTE:
The display EDP cable includes adhesive.
Description
For use only on computer models equipped with WLAN
For use only on computer models equipped with WWAN
Before removing the display EDP cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
28
Chapter 5 Removal and replacement procedures
Spare part number
L43279-001
L38678-001