Transfer Board Cable - HP Spectre Folio Maintenance And Service Manual

9. Remove the hinges (6).
Reverse this procedure to install the hinges.

Transfer board cable

Description
For use only on computer models equipped with WLAN
For use only on computer models equipped with WWAN
Before removing the transfer board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the display panel (see
a. Webcam (see
b. Leather cover (see
c. Speaker assembly (see
d. Keyboard (see
e. Hinges (see
Remove the transfer board cable:
54 Chapter 5 Removal and replacement procedures
Display panel on page
Webcam on page 36)
Leather cover on page
Speaker assembly on page
Keyboard on page 49)
Hinges on page 52)
25), and then remove the following components:
41)
46)
Spare part number
L38677-001
L38676-001