Hinges - HP Spectre Folio Maintenance And Service Manual

Reverse this procedure to install the lower frame.

Hinges

Description
Hinges (2, includes left and right hinges)
Before removing the hinges, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the display panel (see
a. Webcam (see
b. Leather cover (see
c. Speaker assembly (see
d. Keyboard (see
Remove the hinges:
1. Remove the four screw covers (1) that conceal the hinge cover screws.
NOTE:
2. Remove the four Phillips M2.0×4.4 screws (2) that secure the hinge cover to the lower frame.
NOTE:
models equipped with WLAN) and L38688-001 (for use only on computer models equipped with WWAN).
52 Chapter 5 Removal and replacement procedures
Display panel on page
Webcam on page
Leather cover on page
Speaker assembly on page
Keyboard on page
The screw covers are included in the Mylar/Rubber/Tape Kit, spare part number L38695-001.
The hinge cover is available using spare part numbers L38689-001 (for use only on computer
25), and then remove the following components:
36)
41)
46)
49)
Spare part number
L38690-001